URGENT TURNAROUND MATTERS? CONTACT US NOW

Trayed columns

Trays are used in mass transfer operations where pressure drop limitations are not critical. They are mainly used in high pressure distillation operations, various atmospheric and moderate pressure systems and sometimes even used vacuum operations, where i.e. fouling is present. The trays are available in segmental or cartridge type, constructed to suit customers’ requirement. For more information, please contact us.

We offer the following trays:

Sieve tray

Fixed & moving valve trays

  • Lower “froth height” and less entrainment because of lateral gas flow
  • Higher capacity and better turndown compared to sieve trays
  • Good efficiency over a wide operating range
  • Mechanically very stable compared to sieve trays and no moving components
  • Ideally suitable for soiling applications
  • Width and height valve openings variable

Round valves

  • Standard flat valves (MV1) and with tray deck venturi openings (MV4)
  • Heavy and light valves
  • Variable leg lengths

Rectangular valves

  • Improved liquid flow and T/D
  • Mechanically stronger with wide legs
  • Less damage with no rotation
  • Heavy and light valves
  • Variable leg lengths

Caged valves

  • Low liquid flow rate
  • Higher turndown
  • Mechanically stronger
  • Less vulnerable to corrosion

Bubble/tunnel cap trays

  • Standard sizes 3”, 4” and 6”
  • Tunnel version
  • Cap/tunnels according to requirements
  • Also available in plastics

Tray hardware

Finding damaged trays during turnarounds is always an unpleasant surprise. MTE is fully equipped to handle urgent requests. Our large stock of all types of screws, nuts, clamps, washers and valves enables us to act as required. Materials on stock are various types of stainless steel including AISI 410 and Hastelloy. Due to our large stock and our in-house production, we are able to construct parts and pieces for required trays to support our customers. Due to this, downtime is reduced to zero.

On site hardware container service

When a large amount of hardware is needed, for example in case of a turnaround, we offer to place a fully equipped container or trailer on your site. Containing all sorts of hardware in sufficient amounts. In that way, you will always have fast and easy access to the hardware you need.

MTE’s engineers have the necessary experience to support you with the selection of the correct quantity and types. All hardware is produced in our own factory in the Netherlands to ensure maximum flexibility and a short delivery time.

Facts & options

  • Always stock available on site
  • Possibility to include special items or materials
  • Only pay consumption of standard items used
  • Intermediate refill possible
  • 
No stock into your own warehouse
  • Optional with MTE employee
  • One consumption overview after finalizing the work

MTE’s engineers have the necessary experience to support you with the selection of the correct quantity and types. All hardware is produced in our own factory in the Netherlands to ensure maximum flexibility and a short delivery time.

Facts & options

  • Always stock available on site
  • Possibility to include special items or materials
  • Only pay consumption of standard items used
  • Intermediate refill possible
  • 
No stock into your own warehouse
  • Optional with MTE employee
  • One consumption overview after finalizing the work

If you require any technical advice or have a special request, please contact our sales department.

MTE PROCESS TECHNOLOGY
Products

Engineering and production

We are experienced in designing and manufacturing internals according to the latest developments, finding an efficient and economic solution for your application.
Click here for additional information about our engineering and production possibilities.

Column packing

We supply a wide range of metal random packing, plastic random packing and structured packing in different types of grades.
Click here for additional information about column packing.

Trayed columns

Our trays are available in segmental or cartridge type, constructed to suit your requirements.
Click here for additional information about these trays.

Column internals

We supply the additional key internal components that are necessary for the random or structured packing to function.
Click here for additional information about these internal components.

Separators

We supply the appropriate droplet separator for every special application, for this purpose a wide range of material is available for manufacturing.
Click here for additional information about our separators.

Engineering & production

We are experienced in designing and manufacturing internals according to the latest developments, finding an efficient and economic solution for your application.
Click here for additional information about our engineering and production possibilities.

Column packing

We supply a wide range of metal random packing, plastic random packing and structured packing in different types of grades.
Click here for additional information about column packing.

Trayed columns

Our trays are available in segmental or cartridge type, constructed to suit your requirements.
Click here for additional information about these trays.

Column internals

We supply the additional key internal components that are necessary for the random or structured packing to function.
Click here for additional information about these internal components.

Separators

We supply the appropriate droplet separator for every special application, for this purpose a wide range of material is available for manufacturing.
Click here for additional information about our separators.

GET IN TOUCH

Got a mass transfer challenge?

We provide the solution

Together we achieve the maximum performance of your application(s). Please feel free to contact us with any mass transfer related challenge.

""
1
Your Name
Company Name
Contact Number
Tell us briefly about your mass transfer challenge(s)...
0 /
Previous
Next