Ceramic rings

MTE Group
Boezemweg 5
3255 MC Oude-Tonge
The Netherlands

+31 10 231 0260
[email protected]

Ceramic rings

The ceramic rings are broadly used in many heat transfer applications and have excellent acid resistance. We provide the ceramic rings in a variety of sizes, designs and materials.

Ceramic raschig rings

The ceramic raschig ring is a simple cylindrical shaped tube with an aspect ratio of 1:1. The aspect ratio is defined as the ratio between the height and the diameter of the raschig ring. Promoting contact between vapor and liquid phases, while minimizing liquid holdup of the column. Raschig rings are long lasting and cost effective, therefore still used today in many mass transfer applications, preferentially however, for refilling existing columns.

The ceramic rings are available in a wide range of sizes.
The small sizes up to 8 mm are mainly used as catalyst support media. Ceramic rings of 10 to 12 mm are also widely used in water filtration systems. Larger rings from 25 to 50 mm are normally used in acid scrubbers and mainly strippers with low gas flows. These rings can also be produced in high alumina material for additional temperature or chemical resistance.

Larger rings from 100 to 200 mm are often produced with a single wall or cross for mechanical strength. These cross partition rings are used as support device ceramic random packing in i.e. sulfuric acid drying towers. The rings are stacked on ceramic beams to create a strong, corrosive resistant and removable grid.

Ceramic pall rings

Ceramic pall rings are executed with side openings which improves the separation efficiency and thus facilitate a more effective mass transfer. The pressure loss is further reduced due to moderate gas deflection. The capacity characteristics of the ceramic pall rings are more constant in comparison with the cylindrical rings, even over a broader load range.

Benefits

  • High mechanical strength
  • Low porosity
  • High chemical resistance
  • Wide variety of sizes and designs
  • Available in various materials

Sizes ceramic raschig rings

mm568101215
inch⅕"¼"⅓"⅖"½"⅗"

mm25385080100
inch1"1½"2"3"4"

Sizes high alumina raschig rings

mm101620
inch⅖"⅝"⅘"

Sizes ceramic pall rings

mm25385080100
inch1"1½"2"3"4

Sizes ceramic rings with cross partition

mm5080100150
inch2"3"4"6"

Other sizes are available on request.
Delivery of the ceramic rings sizes on stock within 24 hours in Western Europe.

Applications

  • Acid scrubbers and stripping columns
  • Caustic scrubbers
  • Water filtration (i.e. aquariums)
  • Support grid for ceramic random packing
  • Catalyst top layer media

About us

MTE Group provides mass transfer solutions. We are headquartered in the Netherlands with a production and technology facility. Due to our large stock of ceramics and distribution network, we are able to swiftly supply our products and solutions worldwide.

Optimum mass transfer performance

We provide the appropriate raschig rings for different applications, therefore we also offer metal raschig rings and carbon raschig rings.

Together we achieve optimum mass transfer performance. How can we assist you?

The mixture of clay can be adjusted to special requirements or demands in case of need.
For additional information, support or (special) requests, please contact our sales department.

Stock

24/7 availability of 1000mᶟ stock of ceramics

Hydraulic calculations

We perform hydraulic calculations and advise on process design

Material selection

Advice on material selection based on chemical and temperature resistance

Got a mass transfer challenge?

We provide the solution!

Together we achieve optimum performance of your application(s). Please feel free to contact us with any mass transfer related challenge.

 

[email protected]

+31 10 231 0260

 

Boezemweg 5

3255 MC Oude-Tonge

The Netherlands